APPLICATION

• on new buildings directly on structure made from Bricks, Concrete, BCA, etc. These facades SHOULD NOT BE PLASTERED or ISOLATED PREVIOUSLY.
• on buildings already insulated with polystyrene and decorative paint.
• on old building keeping the undamaged plaster.

• fixing the special extruded polystyrene on the facade of the building with adhesive and dowels.
• mounting the Nelissen Brick with the special adhesive.
• embroidered, this special material DOESN'T STAIN THE BRICK.

• The brick is treated against dampness
• Reaction to fire - Euroclass A1
• Dimensions 210x65x20 mm

It has the look of hand-molded bricks, the clay is extracted from the Meuse valley Kesselt Plateau in Belgium Limburg.

APPEARANCE AND STRUCTURE
Are full bricks for facades, have five elongated side faces and covered with sand.
The structure is rough in appearance with thin and irregular ribs covered with sand. Baking process takes place in a casual atmosphere in a gas heated tunnel type oven.

COLOURS
Brick is based on different colors with various shades in the same color.

New! New! New!
We sell the Full Brick for exterior facades.

Dimensions and tolerances:
Tolerance category Class T2
Range category Class R1

Appearance:
Solid, hand moulded frogged brick, group 1
Mean compressive strength: 25 N/mm2

Bond Strength:
0,15 N/mm2 pentru mortar articulat
0,30 N/mm2 pentru mortar in strat subtire
Active soluble salts: S2
Reaction to fire: Euroclasa A1
Water absorption: <17%
Initial rate of water absorption: 5,0kg/m2.min
Water vapour diffusion coefficient: 5/10 ( tabulated value EN 1745)
Gross dry density: 1600 kg/m3, D2
Net dry density: 1660 kg/m3, D2
Equivalent thermal conductivity: 0.47 W/ mk (10, dry, tabulated value EN 1745, P=90%)

Freeze/thaw resistance: F2, Frost-class D according to BRL 1007
Very frost-proof according to PTV 23-002
Characteristic compressive strength: 20 N/mm2 according to PTV 23-002